Automobile și vehicule

One Failed $80 Part Messed up EVERYTHING on my Audi. I Fixed it ALL Without the Dealers Help...

Get the best discount of the year on Raycons! Now through the end of November, go to to get 20% off your order!
I order all my Audi, BMW, Mercedes and European Repair parts from:
This Junk $3,000 Audi TT came with a broken engine mount that took out multiple parts because it was left neglected. We fix all of its mounts and brackets and then upgrade the suspension with a coilover setup from @FCP Euro
Instagram: samcracc
Email Me:


  1. Random


    Acum o Zi

    Jack on a dirt. Why would you do that?



    Acum 3 Zile

    Nice Work on this Audi TT 👍🏻

  3. rolandleap1


    Acum 4 Zile

    I've wondered about safety concerns with welding so close to engines......any fuel lines with even the slightest amount of leakage and BOOM?

  4. chemxfan


    Acum 4 Zile

    When these cars go right, they really go right - & you can tell in Sam's voice. Compared to the hard time that Range Rover gave him, this TT has him sounding positively giddy - way to go, Sam!

  5. Marcus Hay

    Marcus Hay

    Acum 4 Zile

    Bilstein, say it, Bilstein, Bilstien.

  6. Santiago Casillas

    Santiago Casillas

    Acum 4 Zile

    I think you need to lower it more

  7. ace ace

    ace ace

    Acum 5 Zile

    couldnt you get a bracket from the breakers yard sam



    Acum 5 Zile

    Them tyres are dozed too scrap



    Acum 5 Zile

    Stop advertising those earpods they are the worst

  10. Hardway Learning

    Hardway Learning

    Acum 7 Zile

    Do you need a dealer's license to buy these cars at auction?

  11. Mark Manson

    Mark Manson

    Acum 7 Zile

    Easy out tool and a drill for broken bolts, broken off flush.

  12. Ainy Drawing Academy

    Ainy Drawing Academy

    Acum 8 Zile

    Video is very nice😍

  13. Joke Assasin

    Joke Assasin

    Acum 8 Zile

    Whatever happened to his Nissan Figaro?

  14. Papi Chulo

    Papi Chulo

    Acum 8 Zile

    Where’s new video

  15. John Rambo

    John Rambo

    Acum 8 Zile

    I bet those are Bilstein Coilover.

  16. Nick Zagaris

    Nick Zagaris

    Acum 8 Zile

    Nice Bilstein PSS10’s it came with

  17. Dev Johnson

    Dev Johnson

    Acum 9 Zile

    Hey Sam, Next time try a tap and die set. Tap the top of the bolt and die it so the inside threads go the opposite way then screw in a smaller bolt and continue screwing it in until the big bolt starts to unscrew from the hole.

  18. Surprize


    Acum 9 Zile

    always been an anti-audi guy but watching these videos of the TT makes me want to slap a diesel BMW engine in one :O

  19. Cody Hawkins

    Cody Hawkins

    Acum 10 Zile

    still waiting on the TT update!

  20. Roland M

    Roland M

    Acum 10 Zile

    Could have taken the bracket to a machine shop and had that drilled out, no? Cheaper than the new bracket...

  21. ron richardson

    ron richardson

    Acum 10 Zile

    I love these mk1 TT s cheap, fun, well made ,

  22. Christopher Egan

    Christopher Egan

    Acum 10 Zile

    Hi Sam could you put a link in for that tool used to spread the bottom of the shocker please

  23. Ron Packwood

    Ron Packwood

    Acum 11 Zile


  24. Joe Roach

    Joe Roach

    Acum 11 Zile

    Uprated Rear anti roll bar is important on these cars to make them handle better

  25. James Hammitt

    James Hammitt

    Acum 11 Zile

    VAG COM hardware are mostly single use stretch bolts.

  26. maaz haq

    maaz haq

    Acum 11 Zile

    What’s up with the Ferrari

  27. D Turner

    D Turner

    Acum 11 Zile

    SamCrac Commercials

  28. John M Rodgers

    John M Rodgers

    Acum 11 Zile

    was nut you were trying to weld galvanized?

  29. S W

    S W

    Acum 11 Zile

    2004 MERCEDES-BENZ E-CLASS 5.0L Stock#: 28947298 VIN: WDBUF70J34A****** Sam you think this is a good buy and how much do you think this would sell for?

  30. Benton x

    Benton x

    Acum 12 Zile

    I like that you never give up on actually making money on the cars no matter how hard the job. you do good work, congratulations on 1 million subs, do you think you will do giveaways?

  31. skeelo69


    Acum 12 Zile

    Such a shame you don't invest in a Bendpak car lift .

  32. salutetojohnlennon


    Acum 12 Zile

    Why the bolt hole on that bracket is oval and not fitted with the bolt?is that adjustable? thats why the bolt snap because of that space that should have no movement because thats the rubber is for..german engineering.

  33. Vladimir Mishin

    Vladimir Mishin

    Acum 12 Zile

    Excellent build!

  34. Matt cavazos

    Matt cavazos

    Acum 13 Zile


  35. Jon Spencer

    Jon Spencer

    Acum 13 Zile

    My 2019 Callaway Tahoe SC560 is about to go up on Copart in CT. 560hp 6.2L...totaled it 3 weeks ago! Its going to be a sweet rebuild for someone!

  36. Champ1one


    Acum 13 Zile

    I would recommend you to mount S-line 225 40 R16 Wheels

  37. iRdMoose


    Acum 13 Zile

    16:18 Yeah, that's not bad for a glorified beetle

  38. ?


    Acum 13 Zile


  39. Zachary Zarko

    Zachary Zarko

    Acum 13 Zile

    I was subscribed, but when you started wasting time on super expensive cars, half-assing stuff, and not finishing any projects, I unsubscribed. This was a good video, and the work was actually done right.

  40. Wimly D

    Wimly D

    Acum 13 Zile

    L O W E R

  41. Steven Conway

    Steven Conway

    Acum 13 Zile

    I've watched Sam for about two years and only just realised I'm not subscribed :|

  42. Jojo MoreChrist

    Jojo MoreChrist

    Acum 13 Zile

    The world is about to end JESUS CHRIST is coming repent be ready for the Rapture JESUS CHRIST is the only way to HEAVEN and to escape from going going to HELL 6 Jesus said unto him, I am [a]that Way, and that Truth, and that Life. No man cometh unto the Father, but by me. John 14:6 1599 Geneva Bible (GNV) 16 [a]For God so loveth the world, that he hath given his only begotten Son, that whosoever believeth [b]in him, should not perish, but have everlasting life. John 3:16 1599 Geneva Bible (GNV) 18 And am alive, but I was dead: and behold, I am alive for evermore, Amen: and I have the keys of hell and of death. Revelation 1:18 1599 Geneva Bible (GNV) JESUS CHRIST IS coming soon repent follow JESUS CHRIST become a baptized Holy Spirit converted filled born again Christian ready for the Rapture...Pray read the Holy Bible in Revelation shows we are living in end of the world times...Seek JESUS instructions to be ready for the Rapture JESUS return... Also share JESUS CHRIST IS the only way to HEAVEN and to escape from going to HELL...Share JESUS death and resurrection to save our souls from going to Hell with all and share the Holy Gospel of JESUS with all 🙏

  43. fchapp


    Acum 13 Zile

    Wait till you see how much the dsg fluid costs per quart.

  44. Kagiso Reboeleng

    Kagiso Reboeleng

    Acum 13 Zile

    How are you gonna show us the stock ride height while on jerks 😂

  45. stephen cahill

    stephen cahill

    Acum 13 Zile

    Great video Sam

    • Samcrac


      Acum 13 Zile

      Glad you enjoyed it

  46. wrc11


    Acum 13 Zile

    nice mustang

  47. Pappy lj

    Pappy lj

    Acum 13 Zile

    CAN YOU MAKE A GAARGE TOUR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PLZZZ

  48. youtubegamer


    Acum 14 Zile

    dude im not buying those trashy ear wax collectors

  49. Joseph Lawrie

    Joseph Lawrie

    Acum 14 Zile

    I would bet on the nut not welding to the bolt due to the bolt being aluminium

  50. BulletResistant


    Acum 14 Zile

    Lol clickbait title... I was expecting turbo... how does this make it keep it up with R8?. And I’m a regular viewer

  51. E D

    E D

    Acum 14 Zile

    Stuck bolts , left hand drills work a treat can get lucky if they bite they un do the bolt 👌🏻

  52. Andover91


    Acum 14 Zile

    i can say firsthand as the Audi R8 is my favorite car ever that it is much better spec-wise and in beauty than the TT in virtually every metric. but for that price, you might have a bargain bin surprise on your hands!

  53. Noah Clifton

    Noah Clifton

    Acum 14 Zile

    You should do a updated video on how to buy your own car and fix it.

  54. Simon Haaeman

    Simon Haaeman

    Acum 14 Zile

    it's sad we doesn't have a platform like fcp euro in Denmark :/

  55. Big John

    Big John

    Acum 14 Zile

    You paid $3k for a used Audi? BIG SPENDER $900 TOPS

  56. Will Jacques

    Will Jacques

    Acum 14 Zile

    Brought back memories of doing the cambelt on my TT, and having to remove that bracket. They were not good memories...

  57. 42INS


    Acum 14 Zile


  58. Iberica Overland

    Iberica Overland

    Acum 14 Zile

    Half video talking about coilovers but only two of them are

  59. haider bilal

    haider bilal

    Acum 14 Zile

    Tune the audi r8

  60. J4nzki


    Acum 14 Zile

    Unfortunately febi parts are consired ”chinaparts” here in Europe I’m afraid.

  61. b0zay


    Acum 14 Zile

    didnt u say before lamborghini murcielago was ur fav car of all time?

  62. 5ebra1


    Acum 14 Zile

    I can’t believe your jacks are safe in a field. Why don’t you work on firmer ground. I enjoyed the video again.

  63. brandon emmanuel

    brandon emmanuel

    Acum 14 Zile

    adam stanler LOOOL

  64. Beardybastard


    Acum 15 Zile

    I own both cars, v8 r8 and the 1.8t 225 tt, the tt is tuned to only around 350bhp but its so much more fun than the r8, it feels small and wants to be driven hard and fast, I feel the r8 doesn't like being smashed through the gears full pelt

  65. Joe Gioia

    Joe Gioia

    Acum 15 Zile

    "Audi's best tt" i hope you're talking just the mk1 because the tt rs would like a very angry 5cyl turbo word with you 🤣

  66. Robert Kenny

    Robert Kenny

    Acum 15 Zile

    Have you got a clip on just you, where you live, the farm, family etc???? Your like the guy next door!! I’d like you as my neighbour!!! Rob Devon UK

  67. Robert Kenny

    Robert Kenny

    Acum 15 Zile

    Love the editing!! No long vids on fitting parts. To the point!! Like it!!

  68. John Johnson

    John Johnson

    Acum 15 Zile

    Does it come natural acting like an idiot

  69. Zak Browne

    Zak Browne

    Acum 15 Zile

    Just take the part to an edm shop and have them burn the bolt out

  70. jeremie manninen

    jeremie manninen

    Acum 15 Zile

    project farm on youtube has a good video on what the best extractor is and this is by putting them through a very thorough torture-test

  71. Masons koonce

    Masons koonce

    Acum 15 Zile

    U need a lift

  72. Brad Ross

    Brad Ross

    Acum 15 Zile

    did you get an alignment after height adjustment?

  73. shawn d

    shawn d

    Acum 15 Zile

    Something is clearly wrong with your welder. Is your polarity proper? Guaranteed my HD lincoln welder would have had no issue. Would have broken the bolt before the weld came loose.

  74. Vivek Moorthy

    Vivek Moorthy

    Acum 15 Zile

    Given the awesome work you do, have you ever considered getting a lift? Be well, stay safe. Ps. my four year old and I love your videos. Super informative.

  75. German Diaz

    German Diaz

    Acum 15 Zile

    Check out UroTuning in Tampa if you need parts for anything Euro. For enthusiasts by enthusiasts #UroTuned

  76. Hristian Hristov

    Hristian Hristov

    Acum 15 Zile

    The R8 is the big brother of the TT ;).

  77. Random BS

    Random BS

    Acum 15 Zile

    I’ll sell you a bracket I have plenty of those 3.2 VR6’s

  78. Jason Sun

    Jason Sun

    Acum 15 Zile

    Second on the lift idea. Samcrac you should seriously consider it as an investment!!

  79. Rick


    Acum 15 Zile

    Dude you need that that to VW mechanic. Just give up!

  80. pospc2


    Acum 15 Zile

    Get the dsg service video out

  81. kola sillers

    kola sillers

    Acum 15 Zile

    You are greedy AF. You have million subs, I have three(persons). You want more😂

  82. Jeffrey Cheng

    Jeffrey Cheng

    Acum 15 Zile

    Buy the R8 V10, not the V8 says the Car Wizard.

  83. Kavinsky Smith

    Kavinsky Smith

    Acum 15 Zile

    Given what you did with the Wielder, shouldnt you do like a belt swap or put a new belt on the engine, as its already old, and you just introduced a huge amount of heat and raw metal to that area where it sits? I mean, plus its old and the guy who had this was kind of a douche when it came to maintaining his car, as god only knows if it rubbed somewhere given how tight that engine bay is, and how bad that mount was also with the boot and axel thing at 10:12, repair things in pairs, like you'd be surprised how much uneven wear that causes when you do things like that given how sometimes the castings get changed mid run and can have more weight to them, and how many failures that can lead to down the road, like theirs a reason why certain things are standardized as just replace all type deals when dealing with cars and while some are needless and expensive, some are just good CYA that you cant really argue with as being good thing, unless its a fragile car where just pulling stuff out will break more stuff if you do. Also if the axel was that bad, check the areas around it for damage and damage to the rim, as it could be that theirs some unforscene damage in the area or some damage that was done to the brakes that was causing the braking issue when the car arrived. ala hitting a rock, which took out the axel boot, a rim and possibly damaged your brakes I would wadger.

  84. Chris R

    Chris R

    Acum 15 Zile

    Should have used a diamond countertop bit and then helicoiled it.

  85. Mr.BigOx


    Acum 15 Zile

    you could have hit the bolt with a angle grinder and use a flathead screwdriver

  86. ReverendRobin


    Acum 15 Zile

    Can you make a 986 Boxster S great again??

  87. David Dobinson

    David Dobinson

    Acum 15 Zile

    Aarrrrggggg it's a drive shaft NOT an axle just needed to be said🥰🥰🥰🥰

  88. rico drake

    rico drake

    Acum 15 Zile

    I love that you always share in depth knowledge, keep up up the good work

  89. Adam Smith

    Adam Smith

    Acum 15 Zile

    Sam doing a lot of actual car work himself in this video!



    Acum 15 Zile

    Awesome content thanks Samcrac.

    • Samcrac


      Acum 15 Zile

      Glad you enjoyed it

  91. Dale Engles

    Dale Engles

    Acum 15 Zile

    Chances are pretty good your transmission mount is trashed too. The stock ones weren't very good.

  92. Toby Johnson

    Toby Johnson

    Acum 15 Zile

    Sometimes when trying to remove a bolt I have found that if you can tighten it up just a bit they will back out easier

  93. Curtis Carté

    Curtis Carté

    Acum 15 Zile

    Can’t wait to see this on the road!

  94. I've Never Done This Before

    I've Never Done This Before

    Acum 15 Zile

    You f_cker, quit changing your thumbnails.

  95. MidknightS0N


    Acum 15 Zile

    Thumbs down. Don't want to go to Instagram to see the final results. This is ROfilm. Not Instagram.

  96. Stephen Buttars

    Stephen Buttars

    Acum 15 Zile

    Someone please get this man a lift.

  97. T00LF00L


    Acum 16 Zile

    You need clean metal for a good weld

  98. Khan Tigre

    Khan Tigre

    Acum 16 Zile

    using a pipe extension on a ratchet wrench made me cringe so hard. User a torque bar or something that won't have the mechanisms wrecked by the torque applied

  99. ValdiJr.


    Acum 16 Zile

    And there is that red Ferrari again in the back... are you doing an engine swap?

  100. lee anderson

    lee anderson

    Acum 16 Zile

    gear box side probably needs renewing too ,if steering shakes at high speed or vibrations in transmission it will be that mount personally i would have put some special grease on the bolts to prevent galvanic oxydation